ELECTRIC VALVE SELECTION CONFIGURATION TABLE
Model | Standard | Optional | Power
supply |
Soft seal butterfly valve |
Hard seal butterfly valve |
Ventilation butterfly valve |
Ball valve |
Time/
torque |
Time/
torque |
≤1.0Mpa | ≤1.6Mpa | ≤0.1Mpa | ≤1.6Mpa | ||
POE-05 | 30S/50N.m | 10S/15N.m | AC24V
AC110V AC220V AC380V DC12V DC24V DC220V |
DN25~ DN65 |
DN40 | DN50~ DN80 |
DN15~ DN32 |
20S/30N.m | |||||||
POE-10 | 30S/100N.m | 15S/50N.m | DN80~ DN125 |
DN40~ DN65 |
DN100~ DN200 |
DN40~ DN50 |
|
20S/60N.m | |||||||
POE-20 | 30S/100N.m | 9S/80N.m | AC24V
AC110V AC220V AC380V DC24V DC220V
|
DN150~ DN200 |
DN80~ DN125 |
DN250~ DN300 |
DN65~ DN80 |
15S/100N.m | |||||||
60S/200N.m | |||||||
POE-40 | 30S/400N.m |
|
DN200~ DN250 |
DN125~ DN150 |
DN350~ DN400 |
DN80~ DN100 |
|
POE-50 | 30S/500N.m | 9S/150N.m | DN250~ DN300 |
DN150~ DN200 |
DN400~ DN500 |
DN100~ DN125 |
|
15S/250N.m | |||||||
20S/300N.m | |||||||
60S/500N.m | |||||||
POE-60 | 30S/600N.m |
|
DN300 | DN200 | DN500~ DN600 |
DN125 | |
POE-100 | 50S/100N.m | 15S/300N.m | AC24V
AC110V AC220V AC380V |
DN300~ DN350 |
DN250 | DN600~ DN800 |
DN125~ DN150 |
30S/800N.m | |||||||
POE-200 | 100S/2000N.m |
|
DN400~ DN500 |
DN300~ DN400 |
DN800~ DN1000 |
DN200~ DN250 |
Note:The matching data of the actuator and valve in the table is for reference only, and the torque value providedby the valve manufacturer shall prevail.
Due to the large number of valve types, the torque values of the valves of the same specifications and models aredifferent due to different manufacturing processes, quality levels, structural forms, and material of the valve body.In actual use, often due to the pressure of the system Variations in factors such as fluctuations, media types, fieldenvironment, and operating characteristics can also cause large changes in valve opening and closing torques.In order to ensure the stable and reliable operation of the actuator, it is recommended to leave a sufficient safetyfactor in the selection, that is: safety factor = “output torque of
the actuator” or “valve pressure test torque”≥ 1.2-1.3
times.