Switch type adjustment
Adjustment of electrical limit
1.Before adjusting the electrical limit, the adjusting screw of the mechanical limit should be loosened, and after the electrical limit is adjusted, the mechanical limit should be fixed again and the mechanical block should be imitated
2.Loosen the screw of the stroke block, tap the stroke block with a screwdriver to adjust the angle of the stroke block, thus changing the switch angle of the electrical limit. When the stroke switch operates, a “Click”sound will occur, finally, firmly fasten the screw of the stroke block.
Manual operation is not allowed when power is on！
When the rotation angle of the electric actuator is 0 ~ 90 ° , the rotation angle can not be adjusted excessively or enlarged at will！
Layout of JYL-05 stroke block and stroke switch

Layout of JYL-10 stroke block and stroke switch

Layout of stroke block and stroke switch of JYL-20/40/50/60/100/200